Magnobond 99 - SOLIAO

About
Magnobond 99 is an Epoxy; Epoxide (Epoxy) product. It can be processed by potting and is available in North America.&&

Product Description
Generic	环氧树脂
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.683	g/cm³	ASTM D792

THERMAL	Nominal value	Unit
Thermosetting components
resin	按重量计算的混合比: 100, 按容量计算的混合比: 12
Hardening method	按重量计算的混合比: 14, 按容量计算的混合比: 1.0
storage stability	3.0 to 5.0	min
stripping time
25℃	10000	min
52℃	300	min

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	69		ASTM D2240
Compression modulus	2740	MPa	ASTM D695
compressive strength	39.2	MPa	ASTM D695
shear strength	14.5	MPa	ASTM D732

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.