| About |
|---|
| MAGNUM™ 275 ABS resin is a low gloss, low flow ABS resin with good impact. MAGNUM ABS resins are thermoplastic materials that provide an excellent balance of processability, impact resistance, and heat resistance as imparted by the various polymer compositions. MAGNUM ABS resins are available in a wide range of melt flow rates, impact strengths, and heat resistances for both high and low gloss applications manufactured by injection molding, sheet or profile extrusion, and thermoforming. MAGNUM ABS resins offer a wide range of processing abilities and impact resistance for low gloss injection molding applications. Combined with heat resistance, tensile and flexural strength, MAGNUM ABS resins are used in a wide variety of injection molding applications. Applications Injection molding applications Extrusion and thermoforming applications Complies with: U.S. FDA 21 CFR 181.32 Consult the regulations for complete details.&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Low liquidity,High impact resistance,High Heat Resistance,Low Gloss,HB |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.04 | g/cm³ | ASTM D792 |
| Density | 1.05 | g/cm³ | ISO 1183-2 |
| Melt Flow Rate | |||
| 230℃，3.80kg | 2.6 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 220℃，10 kg | 9.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.40 to 0.70 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1830 | MPa | ASTM D638 |
| Tensile modulus | 2000 | MPa | ISO 527-2 2 |
| tensile strength | |||
| fracture | 34.5 | MPa | ASTM D638 |
| yield | 44.0 | MPa | ISO 527-2 2 |
| yield | 37.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 100 | % | ASTM D638 |
| yield | 3.0 | % | ASTM D638 |
| yield | 2.6 | % | ISO 527-2 2 |
| Nominal strain at break | 30 | % | ISO 527-2 2 |
| Bending modulus | 2030 | MPa | ASTM D790 |
| bending strength | 63.4 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 22.0 | kJ/m² | ISO 179/1eA 2 |
| -30℃ | 9.00 | kJ/m² | ISO 179/1eA 2 |
| Charpy impact strength | |||
| 23℃ | No Break | ISO 179/1eU 2 | |
| -30℃ | No Break | ISO 179/1eU 2 | |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -18℃，3.2mm | 130 | J/m | ASTM D256 |
| 23℃，3.2mm | 270 | J/m | ASTM D256 |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -18℃，Peak Energy | 32.8 | J | ASTM D3763 |
| -18℃，3.20 mm，Total Energy | 37.3 | J | ASTM D3763 |
| 23℃，Peak Energy | 32.8 | J | ASTM D3763 |
| 23℃，3.20 mm，Total Energy | 46.3 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 79.4 | ℃ | ASTM D648 |
| 1.8 MPa | 85.0 | ℃ | ISO 75-2 2 |
| 0.45 MPa, unannealed, 3.2 mm | 93.3 | ℃ | ASTM D648 |
| 0.45 MPa | 95.0 | ℃ | ISO 75-2 2 |
| Vicat Softening Temp | 107 | ℃ | ASTM D1525 |
| B50 | 99.0 | ℃ | ISO 306 2 |
| Linear coefficient of thermal expansion | |||
| MD | 7.9E-5 | 1/℃ | ISO 11359-2 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 | |
| Flame retardant level | |||
| 1.60 mm | HB | ISO 1210 2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3. 39 in/min |
| 4. Type I, 2.0 in/min |
| 5. Type I, 79 in/min |
| 6. 10 mil Notch Depth |
| 7. 11.1 ft/sec |
| 8. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |