| About |
|---|
| DE027 – 8229 is an elastomer modified polypropylene intended for injection moulding, with UV stabilization. DE027 – 8229 has been developed especially for the car industry, to be used in interior or exterior parts requiring excellent high impact strength at low temperature. The product is available in black (DE027 – 8229) and natural (DE027) but other colours can be provided on request. DE027 – 8229 has a very easy flowing and excellent mechanical properties. APPLICATIONS Interior panels Dashboard Consoles Door panels and pockets Bumpers, spoilers&& |
| Product Description | |
|---|---|
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,High impact resistance,Renewable resources,Good liquidity,low-temperature impact resistance,HB |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.910 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 8.0 | g/10min | ISO 1133 |
| Shrinkage rate | 1.0 to 2.0 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 58 | ISO 868 | |
| tensile strength | |||
| yield | 17.0 | MPa | ISO 527-2/50 |
| Tensile strain | |||
| yield | 4.0 | % | ISO 527-2/50 |
| Bending modulus | 900 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -20℃ | 10 | kJ/m² | ISO 179/1eA |
| 0℃ | 14 | kJ/m² | ISO 179/1eA |
| 23℃ | 45 | kJ/m² | ISO 179/1eA |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 46.0 | ℃ | ISO 75-2/A |
| 0.45 MPa, unannealed | 75.0 | ℃ | ISO 75-2/B |
| Vicat Softening Temp | |||
| A50 | 140 | ℃ | ISO 306/A50 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 210 to 250 | °C | |
| Mold temperature | 10 to 30 | °C | |
| Injection speed | Fast | ||
| Hold pressure | 20.0 to 50.0 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.079 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |