MAJORIS G407 - SOLIAO

About
MAJORIS G407 is a special long glass fibre reinforced polypropylene grade, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties. This product is UV stabilised. MAJORIS G407 is available both in natural (MAJORIS G407) and black (MAJORIS G407-8229). Other colours can be provided on request. APPLICATIONS MAJORIS G407 is intended for injection moulding of highly demanding technical applications. The excellent properties of MAJORIS G407 make it suitable for: Electrical components, automotive parts, interior, exterior and under the bonnet, structural furniture parts, load bearing, demanding components for various engineering sectors. MAJORIS G407 can, in many of these applications, substitute other engineering plastics or metal alloys.&&

About

MAJORIS G407 is a special long glass fibre reinforced polypropylene grade, for injection moulding and extrusion. The long glass fibres, chemically coupled to the polypropylene matrix, are providing with outstanding mechanical properties. This product is UV stabilised. MAJORIS G407 is available both in natural (MAJORIS G407) and black (MAJORIS G407-8229). Other colours can be provided on request. APPLICATIONS MAJORIS G407 is intended for injection moulding of highly demanding technical applications. The excellent properties of MAJORIS G407 make it suitable for: Electrical components, automotive parts, interior, exterior and under the bonnet, structural furniture parts, load bearing, demanding components for various engineering sectors. MAJORIS G407 can, in many of these applications, substitute other engineering plastics or metal alloys.&&

Product Description
Generic	PP not specified
Material Status	Commercial: Active
Features	Weather resistance is good,Renewable resources,High Heat Resistance,Chemical coupling,Heat Stabilized
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ISO 1183
Shrinkage rate	0.40	%

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	8650	MPa	ISO 527-1-2
tensile strength
fracture	129	MPa	ISO 527-2/50
Tensile strain
fracture	2.2	%	ISO 527-2/50
Bending modulus	7700	MPa	ISO 178

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-20℃	27	kJ/m²	ISO 179/1eA
23℃	24	kJ/m²	ISO 179/1eA
Charpy Unnotch Impact strength
23℃	52	kJ/m²	ISO 179/1eU

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	162	℃	ISO 75-2/B
Vicat Softening Temp	145	℃	ISO 306/B
Linear coefficient of thermal expansion
MD			ASTM D696
-30℃	4.4E-5	cm/cm/℃	ASTM D696
23℃	3.1E-5	cm/cm/℃	ASTM D696

Process Conditions
injection	Nominal value	Unit	Test method
Barrel rear temperature	230 to 250	°C
Processing (melt) temperature	250 to 280	°C
Mold temperature	80 to 100	°C
Injection pressure	30.0 to 60.0	MPa
Injection speed	慢
Screw speed	30 to 150	rpm

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.