Makrolon® XT5010

About
MVR (300°C/1.2 kg) 34 cm³/10 min; easy processing; low viscosity; easy release; Vicat softening temperature 50 N, 50°C/h = 110°C; injection molding – melt temperature 240 – 280°C; available in transparent colors only; LCD tv frame&&

Product Description
SupplierCovestro
GenericPolycarbonate
Material StatusCommercial: Active
FeaturesExcellent Processability,Low Viscosity,Good stripping performance,V-2
AvailabilitysAfrica & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICALNominal valueUnitTest method
Density1.21g/cm³ISO 1183
Melt Volume Rate
300℃,1.2 kg34.0cm³/10minISO 1133

MECHANICALNominal valueUnitTest method
Tensile modulus
23℃2700MPaISO 527-1-2
tensile strength
Fracture, 23 ℃60.0MPaISO 527-2/50
Yield, 23 ℃75.0MPaISO 527-2/50
Tensile strain
Fracture, 23 ℃90%ISO 527-2/50
Yield, 23 ℃5.0%ISO 527-2/50
Nominal tensile fracture strain
23℃> 50%ISO 527-2/50

IMPACTNominal valueUnitTest method
Charpy Unnotch Impact strength ISO 179/1eU
-30℃No Break ISO 179/1eU
23 ℃, completely fractured220kJ/m²ISO 179/1eU

THERMALNominal valueUnitTest method
Vicat Softening Temp 
B50112ISO 306
B120114ISO 306/B120
Relative temperature index
Electrical performance, 1.50 mm80.0UL 746
Strength mechanical performance, 1.50 mm80.0UL 746
Impact mechanical performance, 1.50 mm80.0UL 746

FLAME CHARACTERISTICSNominal valueUnitTest method
0.8 to 3.0 mm, allV-2 UL 94
Glowing wire flammability index IEC 60695-2-12
0.75 mm960IEC 60695-2-12
1.5 mm960IEC 60695-2-12
3.0 mm960IEC 60695-2-12
Igniting temperature of the hot wire IEC 60695-2-13
0.75 mm800IEC 60695-2-13
1.5 mm825IEC 60695-2-13
3 mm850IEC 60695-2-13

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.