| About |
|---|
| Recommended Applications: 6926 is a UL QMTT2 Recognized Component product rated for THHW (as well as TW and THW) 75 °C wet and 105 °C dry insulation products. 6926 is stabilized without the use of lead products. 6926 is applicable for Style 1015 and MTW products, is rated for Oil Resistant I and II as well as VW-1 applications.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Lead content is low to none,Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.38 to 1.42 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore D, 15 seconds | 42 to 48 | ASTM D2240 | |
| tensile strength | 19.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Stock Temperature（Recommended Extrusion） | 191 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |