| About |
|---|
| Product Description | |
|---|---|
| Supplier | Ginar Technology |
| Generic | PA66 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,Good surface appearance,Good Electrical Properties,High Heat Resistance,Good wear resistance,Grease resistance,Solvent resistance,Fuel resistance,HB |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.49 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：1.6 mm | 0.10 to 0.30 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 193 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 2.0 | % | ISO 527-2 |
| Bending modulus | 10100 | MPa | ISO 178 |
| bending strength | 283 | MPa | ISO 178 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 255 | ℃ | ASTM D648，ISO 75-2/A |
| Melting temperature | 250 | ℃ | DSC |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.20 mm | HB | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| Injection speed | Nominal value | Unit | Test method |
| drying temperature | 70 | °C | |
| Drying time | 4.0 | hr | |
| Temperature at the rear of the barrel | 250 to 300 | °C | |
| Temperature in the middle of the barrel | 250 to 300 | °C | |
| Front temperature of material barrel | 250 to 300 | °C | |
| Nozzle temperature | 290 to 305 | °C | |
| Mold temperature | 30 to 100 | °C | |
| Injection pressure | 50.0 to 120 | MPa | |
| Maintaining pressure | 30.0 to 80.0 | MPa | |
| Back pressure | 0.00 to 0.300 | MPa | |
| Screw speed | 60 to 100 | rpm | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |