| About |
|---|
| Mapex NT0110GN是一种聚酰胺6（尼龙6）产品,。 它可以通过注射成型进行加工,在北美洲、非洲和中东、欧洲或亚太地区有供货。 特性包括: 阻燃/额定火焰 通过 ROHS 认证 High Toughness 冲击改性&& |
| Product Description | |
|---|---|
| Supplier | Ginar Technology |
| Generic | PA6 |
| Material Status | Commercial: Active |
| Features | Ultra high toughness,HB |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.06 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：3.0 mm | 1.5 to 2.2 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 49.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 65 | % | ASTM D638 |
| Bending modulus | 1860 | MPa | ASTM D790 |
| bending strength | 75.8 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30℃ | 270 | J/m | ASTM D256 |
| 23℃ | 800 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 220 | ℃ | ASTM D789 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.20 mm | HB | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |