| About |
|---|
| A general purpose material that is easily customized. Designed for Powder Coating and Electrostatic painting.&& |
| Product Description | |
|---|---|
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | HB |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.80 to 2.00 | g/cm³ | ASTM D792 |
| Shrinkage rate | 1.0 | ASTM D1895 | |
| Shrinkage rate | |||
| MD | 0.050 to 0.30 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.17 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 210 to 320 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | > 260 | ℃ | ASTM D648 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Dielectric strength | 13 | kV/mm | ASTM D149 |
| Arc resistance | > 140 | sec | ASTM D495 |
| Inclined（Plane Tracking） | > 500 | min | ASTM D2303 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HB | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 35 to 45 | ASTM D2583 | |
| tensile strength | 48.3 to 62.1 | MPa | ASTM D638 |
| Bending modulus | 11000 to 12400 | MPa | ASTM D790 |
| bending strength | 124 to 145 | MPa | ASTM D790 |
| Compression modulus | 359000 to 372000 | MPa | ASTM D695 |
| compressive strength | 124 to 152 | MPa | ASTM D695 |
| shear strength | 48.3 to 55.2 | MPa | ASTM D732 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Method A (Short-Time) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |