| About |
|---|
| This low density polyethylene is tailored for extrusion coating applications that require: Excellent processability High line speed at low coating weights High temperature extrusion stability Good drawdown characteristics Low neck-in Typical extrusion coating applications may include: Food packaging Laminations General paper and board coating General flexible packaging&& |
| Product Description | |
|---|---|
| Supplier | Chevron Phillips |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good dissection,Low shrinkage |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 13 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 25 | µm | |
| Oxygen transfer rate | |||
| 25 µ m, extruded coating | 7600 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 25 µ m, extruded coating | 24 | g/m²/24 hr | ASTM F1249 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 87.0 | ℃ | ASTM D1525 |
| Melting peak temperature | 102 | ℃ | ASTM D3418 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |