| About |
|---|
| This low density polyethylene is tailored for cast film applications that require: Excellent openability Suited for high speed converting Good clarity Low COF Typical cast film applications include: Bakery film General purpose packaging&& |
| Product Description | |
|---|---|
| Supplier | Chevron Phillips |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Good Clarity,Smoothness,Low coefficient of friction,High anti-blocking,Low density |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 2.2 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| Casting thin film | 0.15 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 32 | µm | |
| Drop hammer impact | |||
| 32 µ m, cast thin film | 75 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD: 32 µ m, cast thin film | 180 | g | |
| TD: 32 µ m, cast thin film | 250 | g | |
| Oxygen transfer rate | |||
| 32 µ m, cast thin film | 6300 | cm³/m²/24 hr | ASTM D3985 |
| Water vapor transmittance | |||
| 32 µ m, cast thin film | 14 | g/m²/24 hr | ASTM F1249 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 99.0 | ℃ | ASTM D1525 |
| Melting peak temperature | 111 | ℃ | ASTM D3418 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, 31.8 µ m, cast thin film | 115 | ASTM D2457 | |
| Haze | |||
| 31.8 µ m, cast thin film | 7.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |