Marlex® 9503H

About
This gas phase, high molecular weight, ethylene-hexene copolymer with antistatic agent is tailored for lightweight blow molded containers that require: Outstanding ESCR Excellent impact resistance Durability Recyclability Typical blow molded applications for 9503H include: Detergent bottles Industrial containers and large parts Household and industrial chemical containers This resin meets these specifications: ASTM D4976 – PE 235 FDA 21 CFR 177.1520(c) 3.1a, foods of > pH5, types I, IV-B, VI-B, VII-B and VIII per Table 1 of 21 CFR 176.170(c) and use conditions E through G per Table 2 of 21 CFR 176.170(c)&&

About

This gas phase, high molecular weight, ethylene-hexene copolymer with antistatic agent is tailored for lightweight blow molded containers that require: Outstanding ESCR Excellent impact resistance Durability Recyclability Typical blow molded applications for 9503H include: Detergent bottles Industrial containers and large parts Household and industrial chemical containers This resin meets these specifications: ASTM D4976 – PE 235 FDA 21 CFR 177.1520(c) 3.1a, foods of > pH5, types I, IV-B, VI-B, VII-B and VIII per Table 1 of 21 CFR 176.170(c) and use conditions E through G per Table 2 of 21 CFR 176.170(c)&&

Product Description
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	High impact resistance,Renewable resources,Food contact compliance,High molecular weight,Durability,Antistatic property,Hexene copolymers,High ESCR
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.946	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.31	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic detergent, molded, F50	> 800	hr	ASTM D1693B

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, molding	24.0	MPa	ASTM D638
Tensile strain
Fracture, molded	500	%	ASTM D638
Bending modulus
Tangent, molded	1030	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -75.0	℃	ASTM D746A

Notes
1. foods of >pH5, types I, IV-B, VI-B, VII-B and VIII
2. use conditions E through G
3. Typical properties: these are not to be construed as specifications.
4. Type IV, 2.0 in/min
5. 0.50 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.