| About |
|---|
| This high density polyethylene is tailored for cast film applications that require: Very low gel levels Very “clear” film Low taste and odor transfer Excellent WVTR for a chill cast film Easy processing Typical cast film applications include: Coextrusions Overwrap Food packaging Moisture sensitive packaging&& |
| Product Description | |
|---|---|
| Supplier | Chevron Phillips |
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Low speed solidification point,Low odor,High density |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.962 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 6.5 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 32 | µm | |
| Secant modulus | |||
| 1% secant, MD: 32 µ m, cast thin film | 758 | MPa | |
| 1% secant, TD: 32 µ m, cast thin film | 841 | MPa | |
| tensile strength | |||
| MD, fracture, 32 µ m, blow molded film | 29.0 | MPa | |
| TD, fracture, 32 µ m, blow molded film | 23.0 | MPa | |
| Tensile strain | |||
| MD, fracture, 32 µ m, extruded film | 870 | % | |
| TD, fracture, 32 µ m, extruded film | 790 | % | |
| Drop hammer impact | |||
| 32 µ m, cast thin film | 40 | g | ASTM D1709 |
| Elmandorf tear strength | |||
| MD: 32 µ m, cast thin film | 35 | g | |
| TD: 32 µ m, cast thin film | 100 | g | |
| Water vapor transmittance | |||
| 32 µ m, cast thin film | 5.0 | g/m²/24 hr | ASTM F1249 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60 °, 31.8 µ m, cast thin film | 120 | ASTM D2457 | |
| Haze | |||
| 31.8 µ m, cast thin film | 11 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |