| About |
|---|
| Marlex® C100是一种线性低密度聚乙烯材料,。 该产品在北美洲或拉丁美洲有供货,加工方式为:吹塑成型。 Marlex® C100的主要特性有: 高光泽度 高抗环境应力断裂能力 (ESCR) 己烯共聚单体 透明度 典型应用领域包括: 瓶子 容器 食品接触应用&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Hexene copolymers,High ESCR |
| Availabilitys | North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.918 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 10% non-ionic detergent, molded, F50 | > 1000 | hr | ASTM D1693A |
| 100% non-ionic detergent, molded, F50 | > 1000 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, molding | 10.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 600 | % | ASTM D638 |
| Bending modulus | |||
| Tangent, molded | 310 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -75.0 | ℃ | ASTM D746 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |