| About |
|---|
| This extra high molecular weight, ethylene-hexene copolymer is tailored for intermediate bulk container applications that require: Outstanding impact resistance Outstanding ESCR Excellent processability UV stabilization Durability Typical blow molded applications for C513UV include : Intermediate bulk containers Agricultural containers This resin meets these specifications: ASTM D4976 – PE 235 FDA 21 CFR 177.1520(c)3.2a, use conditions B through H per Table 2 of 21 CFR 176.170(c). When contacting fatty foods of Types III, IV-A, V, VII-A, and IX per Table 1 of 21 CFR 176.170(c), the finished articles are to have a volume of at least 18.9 liters (5 gallons).&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Excellent Processability,High impact resistance,Food contact compliance,Ultra high molecular weight,Hexene copolymers,High ESCR |
| Availabilitys | North America,Latin America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.945 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 5.5 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent, molded, F50 | > 2000 | hr | ASTM D1693A |
| 100% non-ionic detergent, molded, F50 | > 2000 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D, molded | 61 | ASTM D2240 | |
| tensile strength | |||
| Yield, molding | 24.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, molded | 700 | % | ASTM D638 |
| Bending modulus | |||
| Tangent, molded | 1070 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | |||
| Compression Molding | 580 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed, molded | 66.0 | ℃ | ASTM D648 |
| Embrittlement temperature | < -75.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 123 | ℃ | ASTM D1525 6 |
| Notes |
|---|
| 1. use conditions B through H |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Type IV, 2.0 in/min |
| 4. 0.50 in/min |
| 5. Type S |
| 6. Rate A (50°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |