Marlex® HMN 6060

About
This high density polyethylene is an ethylene-hexene copolymer tailored for injection molding applications that require: Excellent stiffness Good impact strength Durability and recyclability for sustainability Moderate flow Typical injection molding applications for HMN 6060 include: Crates Tote boxes Structural foam (with proper foaming agent) This resin meets these specifications: ASTM D4976 – PE 233 FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)

About

This high density polyethylene is an ethylene-hexene copolymer tailored for injection molding applications that require: Excellent stiffness Good impact strength Durability and recyclability for sustainability Moderate flow Typical injection molding applications for HMN 6060 include: Crates Tote boxes Structural foam (with proper foaming agent) This resin meets these specifications: ASTM D4976 – PE 233 FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)

Product Description
Supplier	Chevron Phillips
Generic	HDPE
Material Status	Commercial: Active
Features	High impact resistance,Renewable resources,Durability,High density
Availabilitys	North America,Latin America
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.962	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	6.5	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
100% non-ionic surfactant, F50	15.0	hr	ASTM D1693B

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	35	J/m	ASTM D256
Dart impact equipped with measuring instruments
23°C，Peak Energy	19.0	J
23°C，Total Energy	34.0	J

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	88.0	℃
1.8 MPa, unannealed	51.0	℃
Embrittlement temperature	< -75.0	℃	ASTM D746A
Vicat Softening Temp	127	℃	ASTM D1525 5

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	66		ASTM D2240
Tensile strength (yield)	32.0	MPa	ASTM D638
Tensile strain
yield	8.0	%
fracture	> 900	%
Bending modulus
1% secant, 16 mm span	1590	MPa
Tangent, 16 mm span	1720	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.