Marlex® TRB-437LS

About
This high performance PE 4710/PE 100 rated bimodal HDPE, ethylene-hexene copolymer is tailored for the demanding requirements of pressure pipe applications that require: Excellent long-term hoop strength Excellent melt strength Superb resistance to slow crack u0026amp; rapid crack growth Outstanding low-temperature toughness Typical pipe applications for TRB-437LS include the following end-use segments: Municipal Industrial Energy Mining Potable water When blended with an approved black concentrate the material meets or exceeds these standards/classifications: ASTM D3350, Cell Class PE445574C-CC2 ASTM D3350, Cell Class PE445576C-CC2 NSF Standards 14 and 61 PPI designations PE 4710 HDPE and PE 100 HDPE ASTM D4976 – PE 235 NSF 3 rd party ASTM D2513 certified NSF CSA B137.1 and B137.4 certified

About

This high performance PE 4710/PE 100 rated bimodal HDPE, ethylene-hexene copolymer is tailored for the demanding requirements of pressure pipe applications that require: Excellent long-term hoop strength Excellent melt strength Superb resistance to slow crack u0026amp; rapid crack growth Outstanding low-temperature toughness Typical pipe applications for TRB-437LS include the following end-use segments: Municipal Industrial Energy Mining Potable water When blended with an approved black concentrate the material meets or exceeds these standards/classifications: ASTM D3350, Cell Class PE445574C-CC2 ASTM D3350, Cell Class PE445576C-CC2 NSF Standards 14 and 61 PPI designations PE 4710 HDPE and PE 100 HDPE ASTM D4976 – PE 235 NSF 3 rd party ASTM D2513 certified NSF CSA B137.1 and B137.4 certified

Product Description
Supplier	Chevron Phillips
Generic	HDPE
Material Status	Commercial: Active
Features	High impact resistance,Good melt strength,Good tear strength,Copolymer,High density,Solvent resistance,Low temperature toughness,Bimodal molecular weight distribution,Hexene copolymers
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.949	g/cm³	ASTM D1505
Melt Flow Rate
190℃，21.6kg	9.0	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Tensile strength (yield)	24.0	MPa	ASTM D638
Tensile strain
fracture	700	%	ASTM D638
Bending modulus
	965	MPa	ASTM D790
Resistance to rapid crack propagation, Pc
Critical Pressure，S4：0°C	> 12.0	bar	ISO 13477
Full Scale Critical Pressure，FS	> 46.0	bar	ISO 13478
	< -10	°C	ISO 13477
Fundamentals of Hydrostatic Design
23°C	11.0	MPa
60°C	6.90	MPa

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.