| About |
|---|
| MARPOL® EVA 2806 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of MARPOL® EVA 2806 include food contact applications, adhesives/tapes and coating applications. Characteristics include: Antioxidant Food Contact Acceptable&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | High impact resistance,Heat Stabilized |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.949 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.1kg | 6.0 | g/10min | ASTM D1238 |
| Vinyl acetate content | 28.0 | wt% | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 44.0 | ℃ | ASTM D1525 |
| Ring and Ball Softening Point | 150 | ℃ | ASTM E28 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 79 | ||
| Shaw’s D | 27 | ||
| tensile strength | |||
| fracture | 16.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 820 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 19.0 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |