| About |
|---|
| MARPOL® EVA 3243 is a Ethylene Vinyl Acetate copolymer resin designed for photovoltaic cells and encapsulation applications that require a good balance of adhesion and COF. It also exhibits excellent light transmission characteristics Recommended Applications: Encapsulation, hot melt adhesives and photovoltaic cells&& |
| Product Description | |
|---|---|
| Generic | EVA |
| Material Status | Commercial: Negative |
| Features | Good Clarity,Good bond,Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | |
| Melt Flow Rate | |||
| 190℃，2.16kg | 43 | g/10min | ASTM D1238 |
| Vinyl acetate content | 31.5 | wt% | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 33.9 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 66 | ASTM D2240 | |
| Shaw’s D | 13 | ASTM D2240 | |
| Tensile modulus | 8.27 | MPa | ASTM D638 |
| tensile strength | |||
| fracture | 6.21 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 900 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |