| About |
|---|
| MARPOL® HDB 503G is a high density polyethylene, gas phase blow molding resin. It features an excellent balance of physical and molding properties. Recommended Applications: Industrial chemical bottles, household chemical bottles, automotive fluid bottles, toys and pharmaceutical bottles.&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Negative |
| Features | High density |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.954 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.33 | g/10min | ASTM D1238 |
| ESCR(Environmental Stress Cracking Resistance) | |||
| 100% non-ionic detergent | 70.0 | hr | ASTM D1693B |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D638 | ||
| yield | 27.2 | MPa | ASTM D638 |
| fracture | 31.0 | MPa | ASTM D638 |
| Tensile strain | ASTM D638 | ||
| yield | 7.0 | % | ASTM D638 |
| fracture | 950 | % | ASTM D638 |
| Bending modulus | 1140 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 140 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 125 | ℃ | ASTM D1525 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |