MARPOL® Homo 20.NA

About
Additives: Nucleation and Antistat Recommended Applications: Caps, closures, and thin wall containers Homo 20.NA complies with all applicable FDA regulations for food contact applications.&&

Product Description
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	Nucleation,Food contact compliance,Antistatic property,Homopolymer
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.905	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	20	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	27	J/m	ASTM D256-A
Notched impact strength of cantilever beam
23℃	1100	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	127	℃	ASTM D648
Melting temperature	166	℃	DSC

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	107		ASTM D785
Tensile modulus	1790	MPa	ASTM D638
tensile strength
yield	37.9	MPa	ASTM D638
Tensile strain
yield	13	%	ASTM D638
Bending modulus	1520	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.