| About |
|---|
| MARPOL® LL4F 801-SB is a Linear Low Density Polyethylene product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Food Contact Applications. Characteristics include: Antiblock Food Contact Acceptable Slip&& |
| Product Description | |
|---|---|
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Smoothness,High anti-blocking,Food contact compliance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Secant modulus | ASTM D882 | ||
| 1% secant, MD | 200 | MPa | ASTM D882 |
| 1% secant, TD | 214 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 12.4 | MPa | ASTM D882 |
| TD, yield | 10.3 | MPa | ASTM D882 |
| MD, fracture | 33.8 | MPa | ASTM D882 |
| TD, fracture | 24.8 | MPa | ASTM D882 |
| Drop hammer impact | 150 | g | ASTM D1709-A |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. F50 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |