Maxelast® A9885H

About
A SERIES – OVERMOLDING TO PC, ABS, COPOLYESTER Characteristics Bonds to PC, ABS, PC/ABS, and Copolyester Good abrasion resistance Rubbery and soft touch feel Good chemical and oil resistance Resistance to low temperature Wide range of hardness Typical Applications Consumer Industrial Electronics Automotive&&

Product Description
Material Status	Commercial: Active
Availabilitys	North America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tensile strength
yield	17.1	MPa	ASTM D412
300% strain	9.47	MPa	ASTM D412
100% strain	5.77	MPa	ASTM D412
Tensile strain
fracture	580	%	ASTM D412

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	85		ASTM D2240

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.