Maxelast® C4641P

About
C SERIES – CLEAR AND ULTRA-SOFT TPE GRADES Characteristics Excellent clarity Overmold adhesion to polypropylene Ultrasoft TPEs with gel-like properties Soft and cushioning comfort Superior colorability PVC, silicone, and latex free Typical Applications Consumer Packaging Healthcare Electronics&&

Product Description
Material Status	Commercial: Active
Availabilitys	Europe,North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tensile strength
yield	4.41	MPa	ASTM D412
300% strain	2.13	MPa	ASTM D412
100% strain	1.49	MPa	ASTM D412
Tensile strain
fracture	1200	%	ASTM D412

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	40		ASTM D2240

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.