Maxelast® D6780

About
D SERIES – EASY PROCESSING TPES FOR EXTRUSION APPLICATIONS Characteristics Good melt strength Soft touch Smooth surface with dry feel Good weather and heat resistance Low compression set Easy processing Typical Applications Industrial Packaging Consume Heathcare&&

Product Description
Material Status	Commercial: Active
Availabilitys	Asia Pacific,Europe,North America
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.17	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shaw A10.0 sec	70		ASTM D2240
tensile strength	2.85	MPa	ASTM D412
tensile strength	4.93	MPa	ASTM D412
tensile strength	7.10	MPa	ASTM D412
Tensile strain
fracture	490	%	ASTM D412

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.