| About |
|---|
| P2 Series – Economy Grade for Overmolding onto PP and/or Standing Alone Characteristics Soft, flexible feel Excellent grip characteristics Good weatherability Good compression set Easy processability and colorability Available FDA and medical grades Available translucent grades Typical Applications Consumer Industrial Packaging Electronics Healthcare Automotive&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,Europe,North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ASTM D792 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 2.65 | MPa | ASTM D412 |
| 300% strain | 0.980 | MPa | ASTM D412 |
| 100% strain | 0.600 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 850 | % | ASTM D412 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 24 | ASTM D2240 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |