Maxelast® P2635

About
P2 Series – Economy Grade for Overmolding onto PP and/or Standing Alone Characteristics Soft, flexible feel Excellent grip characteristics Good weatherability Good compression set Easy processability and colorability Available FDA and medical grades Available translucent grades Typical Applications Consumer Industrial Packaging Electronics Healthcare Automotive&&

Product Description
Material Status	Commercial: Active
Availabilitys	Europe,North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shaw A10.0 sec	34		ASTM D2240
tensile strength	0.993	MPa	ASTM D412
tensile strength	1.45	MPa	ASTM D412
tensile strength	1.97	MPa	ASTM D412
Tensile strain
fracture	590	%	ASTM D412

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.