Maxxam™ PP6120 B16-2

About
PolyOne’s Maxxam™ family of polypropylene- and polyethylene-based products covers a wide range of applications, markets and performance requirements. Standard grades are compounded with calcium carbonate, glass and talc to provide a desired balance of properties including stiffness, durability, impact resistance and heat resistance. Custom grades are available with features such as UV stabilizers, heat stabilizers, custom color, high impact, etc.&&

Product Description
SupplierPolyone
GenericPP not specified
Material StatusCommercial: Active
FeaturesWeather resistance is good
AvailabilitysNorth America
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density1.05g/cm³ASTM D792
Melt Flow Rate3.5g/10minASTM D1238

MECHANICALNominal valueUnitTest method
tensile strength24.0MPaASTM D638
Tensile strain
fracture95%ASTM D638
Bending modulus1950MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch150J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45 MPa, unannealed110
1.8 MPa, unannealed54.0

Process Conditions
injectionNominal valueUnitTest method
Drying temperature80 to 85°C
Drying time4.0 to 6.0hr
Processing (melt) temperature200 to 240°C
Mold temperature30 to 60°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.051 in/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.