| About |
|---|
| Product characteristics Vacuum formable High chemical resistance Food compliant according to 10/2011/EU, 1935/2004/EC, FDA Product applications Packaging Trays Industrial applications&& |
| Product Description | |
|---|---|
| Generic | PS+PE |
| Material Status | Commercial: Active |
| Features | Food contact compliance,Solvent resistance |
| Availabilitys | North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.03 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| Equilibrium, 23 ℃, 50% RH | < 0.10 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 960 | MPa | ISO 527-2 |
| tensile strength | |||
| yield | 14.0 | MPa | ISO 527-2 |
| Tensile strain | |||
| fracture | 44 | % | ISO 527-2 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | 33 | kJ/m² | ISO 179 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 99.0 | ℃ | ISO 306/B |
| Linear coefficient of thermal expansion | |||
| MD | 8.0E-5 | 1/℃ | DIN 53752 |
| Thermal conductivity coefficient | 0.17 | W/m/K | DIN 52612 |
| Operating temperature | |||
| long-term | 85 | ℃ | |
| short-term | < 100 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+12 | ohms | DIN EN 61340 |
| Volume resistivity | > 1.0E+12 | ohms·cm | DIN EN 61340 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 1.50 mm | HB | UL 94 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |