| About |
|---|
| Medalist MD-12140H is a high performance thermoplastic elastomer designed for use in medical and healthcare applications requiring good flow and elastic properties. Medalist MD-12140H is a low density, low hardness, RoHS compliant, sterilizable grade suitable for injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good flexibility,Smoothness,High liquidity,Good disinfection,Gamma radiation,Halogen free,High pressure disinfection,Elastic,Low density,Low Hardness,Solvent resistance,Ethylene oxide disinfection,Good coloring |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.883 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 12 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second, injection molding | 42 | ASTM D2240 | |
| Shore A, 5 seconds, injection molding | 40 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| fracture | 4.76 | MPa | ASTM D412 |
| 50% strain | 0.931 | MPa | ASTM D412 |
| 100% strain | 1.21 | MPa | ASTM D412 |
| 300% strain | 2.00 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 710 | % | ASTM D412 |
| tear strength | 18.9 | kN/m | ASTM D624 |
| Compression deformation | ASTM D395 | ||
| 23℃，22 hr | 19 | % | ASTM D395 |
| 70℃，22 hr | 78 | % | ASTM D395 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 160 to 177 | °C | |
| Barrel middle temperature | 182 to 204 | °C | |
| Barrel front temperature | 193 to 216 | °C | |
| Nozzle temperature | 182 to 227 | °C | |
| Processing (melt) temperature | 182 to 227 | °C | |
| Mold temperature | 27 to 49 | °C | |
| Injection speed | 中等偏快 | ||
| Back pressure | 0.172 to 0.689 | MPa | |
| Screw speed | 50 to 100 | rpm | |
| Cushion | 3.81 to 12.7 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Die C, 20 in/min |
| 3. Type 1 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |