| About |
|---|
| Medalist(R) MD-12250 is a clear high performance thermoplastic elastomer intended for use in medical and healthcare applications. Medalist(R) MD-12250 is a low density, medium hardness grade that is suitable for extrusion and injection molding.&& |
| Product Description | |
|---|---|
| Supplier | Teknor Apex |
| Generic | TPE |
| Material Status | Commercial: Negative |
| Features | Excellent Processability,Good disinfection,Halogen free,High pressure disinfection,Resistance to kink,Elastic,Low density,Radiation disinfection,Solvent resistance,Ethylene oxide disinfection |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.888 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shore A, 1 second | 53 | ASTM D2240 | |
| Shore A, 5 seconds | 50 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| fracture | 13.0 | MPa | ASTM D412 |
| 50% strain | 1.21 | MPa | ASTM D412 |
| 100% strain | 1.59 | MPa | ASTM D412 |
| 300% strain | 3.59 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D412 |
| tear strength | 35.9 | kN/m | ASTM D624 |
| Compression deformation | |||
| 23℃，22 hr | 17 | % | ASTM D395B |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Extrusion | Nominal value | Unit | Test method |
| Barrel rear temperature | 182 to 232 | °C | |
| Barrel middle temperature | 188 to 238 | °C | |
| Barrel front temperature | 193 to 243 | °C | |
| Nozzle temperature | 199 to 249 | °C | |
| Processing (melt) temperature | 199 to 249 | °C | |
| Mold temperature | 35 to 49 | °C | |
| Injection pressure | 1.38 to 5.52 | MPa | |
| Barrel 1 zone temperature | 182 to 232 | °C | |
| Barrel 2 zone temperature | 188 to 238 | °C | |
| Barrel 3 zone temperature | 193 to 243 | °C | |
| Barrel 4 zone temperature | 185 to 227 | °C | |
| Barrel 5 zone temperature | 199 to 249 | °C | |
| Nozzle temperature | 199 to 249 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |