Medalist™ MD-130

About
Medalist MD-130 is a high performance thermoplastic elastomer specifically designed for healthcare and medical applications, including dropper bulbs. Medalist MD-130 is a medium hardness, low density, halogen-free grade that is suitable for injection molding and extrusion.&&

Product Description
Supplier	Teknor Apex
Generic	TPE
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.888	g/cm³	ASTM D792
Shrinkage rate
MD	2.6	%	ASTM D995
TD	2.6	%	ASTM D995
Melt Flow Rate
200℃，5.0kg	0.50	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	45		ASTM D2240
tensile strength	6	MPa	ASTM D412
Tensile strain
fracture	730	%	ASTM D412
tear strength	18	KN/m	ASTM D624
Compression deformation	15	%	ASTM D395

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion molding conditions	Nominal value	Unit	Test method
Injection temperature
Rear barrel temperature	140-160	°C
Central temperature of the barrel	140-180	°C
Barrel front temperature	170-190	°C
Mold temperature	20-40	°C
Zone 1 temperature	140-150	°C
Zone 3 temperature	150-160	°C
Zone 5 temperature	160-180	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.