Meetwell® H8168

About
CPVC Injection compound for pipe fitting&&

Product Description
Supplier	Meetwell
Generic	CPVC
Material Status	Commercial: Active
Features	V-0
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.50	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	2350	MPa	ASTM D638
tensile strength
yield	45.0	MPa	ASTM D638
Tensile strain
fracture	6.0	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Notched impact strength of cantilever beam
23℃	150	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	105	℃	ASTM D1525

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Flame retardant level	V-0		UL 94

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.