| About |
|---|
| MEGOLON HF 8037 DD IS AN OIL RESISTANT, LOW DIE DROOL, HALOGEN FREE FLAME RETARDANT JACKETING COMPOUND.&& |
| Product Description | |
|---|---|
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Halogen free,Flame Characteristics,Grease resistance |
| Availabilitys | North America,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.52 to 1.58 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 190℃，10.0kg | 0.40 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 89 to 95 | ASTM D2240 | |
| Shore A, 15 seconds | 82 to 88 | ASTM D2240 | |
| tensile strength | |||
| 0.762 mm | 11.7 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 0.762 mm | 300 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -28.0 | ℃ | ASTM D746 |
| Hot pressure test (% Loss, 80 ℃) | 12 | % | IEC 811-3-1 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| The rate of change in tensile strength in air | UL Unspecified | ||
| 121℃，168 hr | 15 | % | UL Unspecified |
| 136℃，168 hr | 15 | % | UL Unspecified |
| The rate of change in ultimate elongation in air | UL Unspecified | ||
| 121℃，168 hr | -10 | % | UL Unspecified |
| 136℃，168 hr | -20 | % | UL Unspecified |
| The rate of change in tensile strength | |||
| 50℃，24 hr | 10 | % | MIL C-24643 |
| 100℃，24 hr | -10 | % | MIL C-24643 |
| 121℃，18 hr，in ASTM #2 Oil | 15 | % | UL Unspecified |
| Change rate of ultimate elongation | |||
| 50℃，24 hr | -15 | % | MIL C-24643 |
| 100℃，24 hr | -5.0 | % | MIL C-24643 |
| 121℃，18 hr，in ASTM #2 Oil | -5.0 | % | UL Unspecified |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | |||
| 3.18 mm | 40 | % | ASTM D2863 |
| NBS smoke density | ASTM E662 | ||
| Flaming，Dm：2.54 mm | 82.0 | ASTM E662 | |
| Non-Flaming，Dm：2.54 mm | 146 | ASTM E662 | |
| Smoke index | 8.00 | NES 711 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Thickness: 30 mil |
| 3. in MIL-L-17672, Thickness: 30 mil |
| 4. in MIL-L-17331, Thickness: 30 mil |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |