| About |
|---|
| Melinex® S is a Thermoplastic Polyester product. It is available in North America. Typical application: Film. Primary characteristic: slip.&& |
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | 热塑性聚酯 |
| Material Status | Commercial: Active |
| Features | Smoothness |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | |||
| With oneself – static | 0.40 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 23 | µm | |
| Secant modulus | ASTM D882 | ||
| 1% secant, MD | 4140 | MPa | ASTM D882 |
| 1% secant, TD | 4830 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield | 103 | MPa | ASTM D882 |
| TD, yield | 103 | MPa | ASTM D882 |
| MD, fracture | 193 | MPa | ASTM D882 |
| TD, fracture | 228 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture | 150 | % | ASTM D882 |
| TD, fracture | 110 | % | ASTM D882 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 260 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 3.7E-5 | 1/℃ | ASTM D696 |
| specific heat | 1340 | J/kg/℃ | ASTM C351 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 1.0E+15 | ohms | ASTM D257 |
| Volume resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric constant | ASTM D150 | ||
| 100 Hz | 3.30 | ASTM D150 | |
| 1 MHz | 3.00 | ASTM D150 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |