| About |
|---|
| Bedding compound for PVC sheathing and PVC insulation. For cables and wire with max. 90°C operating temperature at conductor.&& |
| Product Description | |
|---|---|
| Generic | EPM |
| Material Status | Commercial: Active |
| Features | Halogen free,Low to no mobility |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.91 | g/cm³ | ISO 1183/A |
| Mooney viscosity | |||
| ML 1+4，100℃ | 22 | MU | DIN 53523 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 67 | ISO 7619 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+9 | ohms | VDE 0472 |
| Volume resistivity | |||
| 27 ℃ | > 1.0E+12 | ohms·cm | VDE 0472 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 70 to 90 | °C | |
| Barrel 2 zone temperature | 80 to 100 | °C | |
| Barrel 3 zone temperature | 85 to 105 | °C | |
| Barrel 4 zone temperature | 90 to 110 | °C | |
| Connector temperature | 90 to 110 | °C | |
| Head temperature | 95 to 115 | °C | |
| Nozzle temperature | 100 to 120 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |