| About |
|---|
| Non flame-retardant bedding compound for XLPE insulation and HFFR sheathing. Bedding compound for cables and wire with max. 90°C operating temperature at conductor.&& |
| Product Description | |
|---|---|
| Generic | IIR |
| Material Status | Commercial: Active |
| Features | Halogen free |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.91 | g/cm³ | ISO 1183/A |
| Mooney viscosity | |||
| ML 1+4，100℃ | 55 | MU | DIN 53523 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | > 1.0E+9 | ohms | VDE 0472 |
| Volume resistivity | |||
| 27 ℃ | > 1.0E+12 | ohms·cm | VDE 0472 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 75 | ISO 7619 | |
| tensile strength | > 0.500 | MPa | IEC 811-1-1 |
| Tensile strain | |||
| fracture | > 20 | % | IEC 811-1-1 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 80 to 100 | °C | |
| Barrel 2 zone temperature | 90 to 110 | °C | |
| Barrel 3 zone temperature | 90 to 110 | °C | |
| Barrel 4 zone temperature | 95 to 115 | °C | |
| Connector temperature | 105 to 125 | °C | |
| Head temperature | 110 to 130 | °C | |
| Nozzle temperature | 110 to 130 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |