| About |
|---|
| Metlbond 1515-4 is a 350°F (177°C) curing modified epoxy supported film adhesives. Metlbond 1515-4 can also be cured at 250°F (121°C). Its maximum continuous service temperature range is 275°F to 320°F (135°C to 160°C). Metlbond 1515-4 is commonly used for Boeing BMS 5-154 metal-to-metal and composite bonding and BMS 8-341 cosmetic surfacing. Suggested Applications: Metal-to-metal bonding Composite bonding Cosmetic surfacing&& |
| Product Description | |
|---|---|
| Supplier | Cytec Industries |
| Generic | 环氧树脂 |
| Material Status | Commercial: Active |
| Features | Good surface appearance,High Heat Resistance,Moisture resistance,Baking |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| THERMAL | Nominal value | Unit | Test method |
| Glass transition temperature | 170 | ℃ | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| volatility | < 1.0 | % |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |