| About |
|---|
| 2228C/FS-65S White 4001 is a DEHP-Free, medical extrusion grade compound developed for tubing and profiles with a “frosted surface”.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.17 to 1.21 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 175℃，10.0kg | 12 | g/10min | ASTM D3364 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | 38.5 | kN/m | ASTM D1004 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds, 6.35 mm | 62 to 68 | ASTM D2240 | |
| Tensile modulus | |||
| 100% secant, 1.91 mm | 4.83 | MPa | ASTM D638 |
| tensile strength | |||
| 1.91 mm | 12.8 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 1.91 mm | 380 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Melt temperature | 152 to 168 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Graves |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |