MFE® -10 - SOLIAO

About
MFE-10 is a bisphenol-A epoxy vinyl ester resin with low styrene emission Property Suitable viscosity, excellent infiltration with glass fiber. Low styrene content Excellent chemical resistance. Heat distortion temperature of casting is 130°C Application Special for the molding processes of thermal curing FRP such as pultrusion, filament winding, etc Used to cementation or repairing material for concrete structure.&&

About

MFE-10 is a bisphenol-A epoxy vinyl ester resin with low styrene emission Property Suitable viscosity, excellent infiltration with glass fiber. Low styrene content Excellent chemical resistance. Heat distortion temperature of casting is 130°C Application Special for the molding processes of thermal curing FRP such as pultrusion, filament winding, etc Used to cementation or repairing material for concrete structure.&&

Product Description
Supplier	Huachang
Generic	乙烯基酯
Material Status	Commercial: Active
Features	Low odor,Solvent resistance
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
acid value	8.00 to 16.00	mg KOH/g
Solid content	70 to 76	%

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	130	℃	ASTM D648
thermal stability
80℃	1	day

Thermosetting mixed viscosity	Nominal value	Unit
25℃	400 to 500	cP
Gelation time
25℃	10.0 to 20.0	min

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	45		ASTM D2583
Tensile modulus	3000	MPa	ASTM D638
tensile strength	75.0	MPa	ASTM D638
Tensile strain
fracture	3.5	%	ASTM D638
Bending modulus	3200	MPa	ASTM D790
bending strength	140	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.