MIDILENA III HDPE2200J

About
MIDILENA III HDPE2200J is a High Density Polyethylene product. It can be processed by injection molding and is available in Europe. Applications of MIDILENA III HDPE2200J include automotive and containers. Primary characteristic: antioxidant.&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Inoxidizability,Halogenated
Availabilitys	Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.960	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	5.0	g/10min	ISO 1133

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.