| About |
|---|
| Milastomer™ 4010NS is a Thermoplastic Vulcanizate (TPV) material. It is available in North America for extrusion. Typical applications include: Additive/Masterbatch Handles&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | TPV |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.880 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 230℃，10.0kg | 5.0 | g/10min | ISO 1133 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 4.40 | MPa | ISO 37 |
| 100% strain | 1.20 | MPa | ISO 37 |
| Tensile strain | |||
| fracture | 610 | % | ISO 37 |
| Compression deformation | ISO 815 | ||
| 23℃，22 hr | 25 | % | ISO 815 |
| 70℃，22 hr | 43 | % | ISO 815 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ISO 48 | ||
| Shaw’s A | 46 | ISO 48 | |
| Shore A, 5 seconds | 40 | ISO 48 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -60.0 | ℃ | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |