| About |
|---|
| Product Description | |
|---|---|
| Supplier | DuPont |
| Generic | PA66 |
| Material Status | Commercial: Negative |
| Features | Heat Stabilized |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Tensile modulus | 5800 | MPa | ISO 527 |
| tensile strength | |||
| fracture | 89 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 10 | % | ISO 527 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -30℃ | 4.5 | kJ/m² | ISO 179/1eA |
| 23℃ | 6 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | ISO 179/1eU | ||
| -30℃ | 80 | kJ/m² | ISO 179/1eU |
| 23℃ | 130 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 110 | ℃ | ISO 75f |
| 0.45 MPa, unannealed | 220 | ℃ | ISO 75f |
| Vicat Softening Temp | |||
| B50 | 235 | ℃ | ISO 306 |
| Melting temperature | 256 | ℃ | ISO 11357-1-3 |
| Linear coefficient of thermal expansion |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 | — | null |
| Drying time – hot air dryer | 2.0 to 4.0 | — | null |
| Recommended maximum moisture content | 0.20 | — | null |
| Processing (melt) temperature | 285 to 305 | — | null |
| Mold temperature | 70 to 120 | — | null |
| Maintaining pressure | 50.0 to 100 | — | null |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |