MIPELON™ XM-330

About
MIPELON™ XM-330是一种超高分子量聚乙烯产品,。它,在非洲和中东或欧洲有供货。

Product Description
Supplier	Mitsui
Generic	Ultra-high molecular weight polyethylene
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.940	g/cm³	Internal Method
Apparent density	0.50	g/cm³	ASTM D1895
molecular weight	1800000		Internal Method
Average particle size	60	µm

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	136	°C	ASTM D3418

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	65		ASTM D2240
Tensile strength (fracture)	44.0	MPa	ASTM D638
Tensile strain
fracture	350	%	ASTM D638
friction coefficient	0.20

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.