| About |
|---|
| MIRASON™ 11P是一种低密度聚乙烯材料,。 该产品在亚太地区有供货,加工方式为:挤出涂层。 MIRASON™ 11P的典型应用领域为:包装&& |
| Product Description | |
|---|---|
| Supplier | Mitsui |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.917 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 7.2 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 86.0 | ℃ | ASTM D1525 |
| Melting temperature | 106 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 49 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 8.83 | MPa | |
| fracture | 13.7 | MPa | |
| Tensile strain | |||
| fracture | 600 | % | ASTM D638 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |