Mirathane™ E190

About
Mirathane™ E190 is a Thermoplastic Polyurethane Elastomer (Polyester) (TPU-Polyester) product. It is available in Asia Pacific. Applications of Mirathane™ E190 include coating applications, engineering/industrial parts, hose/tubing, additive/masterbatch and automotive. Characteristics include: Chemical Resistant Good Flexibility Puncture Resistant Wear Resistant&&

Product Description
SupplierMiracll
GenericTPU-酯
Material StatusCommercial: Active
FeaturesGood Dimensional Stability,Resistance to kink,Low temperature toughness,Good wear resistance,Grease resistance,Solvent resistance,Puncture Resistant
AvailabilitysAsia Pacific

Technical Data
PHYSICALNominal valueUnitTest method
Density1.19g/cm³ASTM D792

elastic bodyNominal valueUnitTest method
tensile strength ASTM D412
yield34.0 to 40.0MPaASTM D412
100% strain9.00 to 10.0MPaASTM D412
300% strain18.0 to 24.0MPaASTM D412
Tensile strain
fracture420 to 450%ASTM D412
tear strength110 to 140kN/mASTM D624
Compression deformation ASTM D395
23℃,72 hr25%ASTM D395
70℃,22 hr35 to 45%ASTM D395
100℃,24 hr45%ASTM D395

THERMALNominal valueUnitTest method
Glass transition temperature 
-34.0ASTM D3417
-36.0DSC
Operating temperature-20 to 90

MECHANICALNominal valueUnitTest method
Shore hardness
Shaw’s A92 ASTM D2240
Wear amount35.0mm³DIN 53516

Process Conditions
ExtrusionNominal valueUnitTest method
Drying temperature90 to 100°C
Drying time3.0 to 4.0hr
Barrel 1 zone temperature205°C
Barrel 2 zone temperature200°C
Barrel 3 zone temperature195°C
Nozzle temperature210°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 10°C/min
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.