| About |
|---|
| 良好的透明性、优异的物性，气动管、传送带、螺旋管、气垫、透明注塑件 |
| Product Description | |
|---|---|
| Supplier | Miracll |
| Generic | TPU |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.21 | g/cm³ | ASTM D792 |
| hardness | 96 | Shore A | ASTM D2240 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 30 | MPa | ASTM D412 |
| 100% 模量 | 10 | MPa | ASTM D412 |
| 300% modulus | 20 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 340 | % | ASTM D412 |
| tear strength | 100 | kN/m | ASTM D624 |
| DIN wear | 45 | Mm3 | DIN 53516 |
| Compression deformation | |||
| 23℃，72 hr | 30 | % | ASTM D395 |
| 70℃，22 hr | 43 | % | ASTM D395 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | |||
| 10℃/min | －15 | ℃ | DSC |
| Process Conditions | |||
|---|---|---|---|
| Extrusion molding | Nominal value | Unit | Test method |
| injection molding | Nominal value | Unit | Test method |
| injector | 215 | ℃ | |
| Measurement section | 210 | ℃ | |
| Compression section | 205 | ℃ | |
| Feed section | 200 | ℃ | |
| Injection pressure | 80 | kg | |
| Mouth mold | 200 | ℃ | |
| connector | 205 | ℃ | |
| Measurement section | 200 | ℃ | |
| Compression section | 195 | ℃ | |
| Feed section | 190 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |