Mirathane™ H190

About
Mirathane™ H190 is a Thermoplastic Polyurethane Elastomer product. It is available in Asia Pacific.&&

Product Description
Supplier	Miracll
Generic	TPU
Material Status	Commercial: Active
Availabilitys	Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.20	g/cm³	ASTM D792

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s A	97		ASTM D2240

elastic body	Nominal value	Unit	Test method
tensile strength
yield	40.0	MPa	ASTM D412
Tensile strain
fracture	400	%	ASTM D412
tear strength	110	kN/m	ASTM D624

Supplementary information	Nominal value	Unit	Test method
Crystallization rate	very fast

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	130	℃	ASTM D6493
Tfb	70	℃
Tack Time	6.0	min

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.