Mocreate® DCM01-3101

About

Product Description
SupplierZhetie Daphoon
GenericPolycarbonate
Material StatusCommercial: Negative

Technical Data
PHYSICALNominal valueUnitTest method
Density
23℃/H2O1.25g/cm³ISO 1183-1
Melt Flow Rate
300℃,1.2kg9g/10minISO 1133
Shrinkage rate
2mm flow0.2~0.4%ISO 294-4
Moisture≤0.3%ISO 960
ash content9~10%ISO 3154.1

MECHANICALNominal valueUnitTest method
tensile strength
50mm/min82MPaISO 527-1
Tensile strain
Fracture, 50mm/min3.5%ISO 527-1
bending strength
2mm/min110MPaISO 178
Bending modulus
2mm/min3600MPaISO 178

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch
23℃,4.0mm8KJ/m²ISO 180
Impact strength of cantilever beam notch
23℃,3.2mm75J/mASTM D256

THERMALNominal valueUnitTest method
Hot deformation temperature
0.45MPa140ISO 75-1
1.8MPa135ISO 75-1

FLAME CHARACTERISTICSNominal valueUnitTest method
Flame retardant level
1.6 mmV-0UL 94

Notes
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.
Inquire Nowlink