| About |
|---|
| MonoSol E6030C is a PVOH based thermoplastic film, soluble in cold water and manufactured using MonoSol’s proprietary solution cast technology. MonoSol E6030C is an embossed rapidly dissolving clear PVOH film used for delivery of industrial and household cleaning compounds. Its relatively high modulus makes it particularly suitable for wrapped products. This film is commonly used for Toilet Block Disinfectants, Deodorizers and Cleaners and is converted on conventional pleat wrapping and flow-wrapping. Standard thicknesses are 20 micron (0.8 mil), 25 micron (1.0 mil) and 38 micron (1.5 mil).&& |
| Product Description | |
|---|---|
| Generic | PVOH |
| Material Status | Commercial: Active |
| Features | Biodegradable,Embossing,Water soluble |
| Availabilitys | North America,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| water content | |||
| 23℃ | 5.2 | % | |
| solubility | |||
| Disintegration：10℃，25.4 µm | 6.0 | sec | |
| Disintegration：24℃，25.4 µm | 3.0 | sec | |
| Dissolution：10℃，25.4 µm | 22.0 | sec | |
| Dissolution：24℃，25.4 µm | 15.0 | sec | |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | 20 µm and 25 µm | ||
| Secant modulus | |||
| 100%，MD | 21.7 | MPa | ASTM D882 , ISO 527-3 |
| tensile strength | |||
| MD, fracture | 25.2 | MPa | ASTM D882 |
| MD | 25.2 | MPa | ISO 527-3 |
| Tensile strain | |||
| MD, fracture | 280 | % | ASTM D882 , ISO 527-3 |
| Drop hammer impact | |||
| 25 µm | 300 | g | ASTM D1709，DIN 53433 |
| Elmandorf Tear Strength – MD | |||
| — | 830 | g | ASTM D1922 |
| — | 0.084 | N | ISO 6383-2 |
| dosage | |||
| 25.4 µm | 2.99 | m²/kg | ASTM D4321 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 50%RH |
| 3. Distilled Water (MSTM 205) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |